Restoration after subsidence detected

/images/b_URETEK-DEEP-INJECTIONS-URETEK-ITALIA-272.jpg
The cause of the subsidence is eliminated, not just its aftermath

Technologies that give a second chance to the building

It can be extremely disturbing for owners of a house or building that suffers from the serious subsidence.

               Traditional signs of a house damaged by subsidence can range from non-disturbing, very small cracks in walls and uneven concrete driveways to annoying factors, such as skewed doors and windows that do not close properly, or gaps between walls and adjacent constructions (floors, ceilings).

               Many homeowners are concerned about the potential damage to their home (and property) that could ultimately become so serious that it could result in a partial demolition of their home or require serious capital work. However, many users do not understand that, no matter how serious the visible damage, the reason for this often lies in the unstable or weak ground of the base under their house.

               To help appease a growing number of property owners concerned about the structural integrity of their homes, Uretek has launched a campaign to raise awareness of the consequences of subsidence of land beneath buildings and structures. The training includes informing homeowners that there is a convenient and cost-effective solution to help solve the problem quickly and without disruption using Uretek technology.

               Unique two in one solution. Uretek helps the future of homes affected by subsidence by strengthening the foundation under the foundation of the house while lifting and leveling the house (back to its original level). This leads to the fact that cracks in the walls are closed up, the doors and windows “snap” again, and the floors and skirting boards are without gaps. Nevertheless, the best result for homeowners is peace of mind that the land under their “substantial investment” is solid and unlikely to move again in the future.

               Recently, Uretek was used in a number of cases for the successful restoration of houses throughout Russia territory:

               The owners of the house in Tver were worried that their extension would have to be demolished due to subsidence and deformations caused by a leaking drainage pipe. Uretek was able to successfully strengthen the foundation, helping prevent future subsidence.

               The homeowner in Kaluga was concerned that serious cracks and uneven floors in the house could not be fixed due to the underfloor heating system in the house. However, the non-invasive application of Uretek allowed the house to be “fixed” without causing significant damage to the floor.

               In the house in Ufa, there were large floor-to-ceiling cracks running along several walls at the back of the house, which did not allow closing doors and windows. Uretek was able to successfully raise the rebuild room and close the cracks.

               The house, built on a steep slope in Saratov, suffered from poor bearing capacity of the soil base, since the foundation of the house was built over an old landfill. Uretek was able to strengthen the soil under the foundation of the house to prevent the risk of further subsidence.

               These cases demonstrate how subsidence can have a different effect on the structural integrity of a home. Common causes of foundation weakening, which can be a catalyst for foundation and wall problems, include:

- Leaking pipes

- Insufficient drainage capacity

- Heavy rains or lingering frosts periods

- Construction work nearby or heavy traffic

- Tree roots and groundwater

- Old age and wear of building materials

Show more ⬇
Request a free consultation with a geotechnical engineer to discuss your case and determine the options and solutions that are right for you

The loss of the base of its load-bearing properties can be caused by the following factors:

  • Not well compacted base
  • Extra loads
  • Breakdowns and accidents of engineering communications
  • Regular fluctuations of moisture and temperature
  • Earthworks or piling nearby
  • Impact of regular vibrations
  • Biological processes in base soils
  • Seismic activity

Questions answered by Uretek:

  • What happens to a building or structure in general?
  • What caused cracks or displacement of structures?
  • Does it make sense to wait for improvements or changes, and what?
  • Is it possible to do cosmetic repairs and for how long?
  • What happens if you do nothing and in what time frame?
  • Will and what specific "shop-or-do-it-yourself" solutions help?
  • Will the "familiar foreman" be able to resolve the issue?
  • Is it possible and how to slow down or stop the process of destruction?
  • Is it possible to return everything as it was? What are the options?
  • When is it better and cheaper to start solving? Is it possible not right away?
  • How much does it cost to resolve the issue and what are the conditions for implementation?
  • What can be done for X rubles?
World wide brand since 1978
Warranty terms up-to 60 years

                      International expertise and database of projects
International expertise and database of projects
Approved international technologies
Individual project and raw material design
Visual effect and approving results
Increasing value and lifecycle of your property
Ecologically neutral materials
YOU CAN CONTACT URETEK:
Understand what is happening
Make an informed and informed decision
Take control of an asset
Increase facility life
Stop Lost Asset Value
Choose the most suitable way to implement the solution
Completed projects

Technological excessive subsidence of a building columns

Stopping subsidence and increasing the load-bearing capacity of the pile foundation

In a residential building, a floor slab sank after a pipe burst

Reinforcement of base soils and re-leveling of floor slab

Erection of a new curtain wall on the existing foundation

Strengthening and sloughing of soils of the base of the foundation

Cracks on load-bearing walls, incl. on window and doorways

Reinforcement of foundation soils, filling of voids

Weak watered soils and unsuccessful attempt to stabilize

Reinforcement of soils at the base of slab foundations

Cracks on the inner sides of the walls of the basement room

Strengthening and consolidation of soils of the base of foundations

Local floor subsidence

Reinforcement of base soils and leveling of the floor slab

Tank bottom subsidence

Reinforcement and leveling of the steel bottom

Deformations and cracks of supporting structures

Reinforcement of soils of foundations

Internal load-bearing columns have undergone settlement

Stopping uneven settlement of column foundations

Draft of the structure with non-standard heel

Aligning the tank structure

Eroding the foundation of the supporting columns

Strengthening the foundation foundation without disrupting the entire project schedule

Strengthening the foundation soil and stabilizing the foundation

Strengthening the foundation soil and stabilizing the foundation

Negative effects of dynamic loads on foundations and floor slabs

Reinforcement of foundation soils and leveling of foundations and floors

Erosion under the floor and foundations

Stabilizing piles and leveling the foundation slab

Re-leveling of industrial structures

Alignment in the plane of structures of foundations and equipment

Washing out some of the soil and damage to floor slabs

Reinforcement and local leveling of floor slabs

Reinforcement of foundation soils and stabilization of the foundation

Reinforcement of foundation soils and stabilization of the foundation

Uneven settlement of a building after a pipe break

Strengthening the soils of the base of the strip foundation

Draft of one of the corners of the building

Raising and leveling the foundation slab in the horizon

Ragged horizontal cracks began to appear and develop

Reinforcement of foundation soils and filling of voids

Insufficient bearing capacity of base soils

Reinforcement of base soils and leveling of the floor slab

The room sagged due to a weak soil base

Strengthening the base and leveling sagging structures

The back of the house began to sag. Cracks appeared on the walls and ceiling

Strengthening and lifting load-bearing structures quickly and safely

Lack of bearing capacity of the base

Securing soils under floors in places where racks are installed

A void has formed under the foundation slab

Reconstruction of the foundation slab support

The method of reinforcement proposed by the prescription did not suit the customer

Strengthening the base and vertical lifting of sagging structures

Uneven settlement of the floor slab and the foundation of the landing stage

Leveling the floor slab and lifting sagging foundation elements

Soil leaching and significant settlement of floors and foundations

Reinforcement of soils of the base of foundations, lifting and leveling the floor slab

Cracks in the walls with development in time

Reinforcement of foundation soils and lifting of structures

Some of the column foundations have undergone uneven settlement

Stopping uneven settlement of column foundations

Cracks in load-bearing walls

Repair and restoration work with soil and bearing structures

Deformations of barbecue area structures

Filling and leveling the foundation

Uneven settlement of load-bearing columns

Stopping sedimentary processes

Uneven settlement of foundations with deformations

Reinforcement of the foundation soils, recommendations for drainage are given

Progressive uneven settlement of the foundation with a heel

Strengthening the foundation soil and leveling the building

Insufficient bearing capacity of watered base soils

Increasing the bearing capacity of the base and foundations

Excessive uneven settlement of foundations

Reinforcement of the foundation and lifting of settled foundations

Drawdown of road maps of the ring road

Aligning the plane of the road while maintaining the "slope"

Local subsidence of the floor of the room

Reinforcement of base soils and leveling of the floor slab

Sagging corner of the house and a crack along the body of the foundation

Deformation stabilization

A void has formed under the foundation slab

Recreating the support of the foundation slab on the base

Building roll problem

Reinforcement of the base and alignment of the roll

Uneven draft on average 45 mm

Compaction of the base and return of structures to their previous level

Unstable foundation and settlement of load-bearing structures

Stopping the processes of settling foundations

Deformation of crane runways of the Crane-Stacker

Alignment of crane rails

Leakage of the retaining wall of the entrance to the underground garage

Compaction of soils and plugging of leaks in the retaining wall structure

Deflection of the floor slab and the appearance of cracks on load-bearing walls

Reinforcement, filling and leveling of floor slabs

Defects in overhead structures from frost heaving in soils

Strengthening the base soils with the elimination of heaving properties

Subsidence of the slab and the appearance of a longitudinal crack

Compaction of the soil with filling the gap under the slab

Uneven house draft during renovation

Providing support for foundations with alignment of structures

The foundation has settled with deformations reflected on the floor slabs

Stopping the processes of settling foundations and leveling the working surface of the floor slabs

Uneven settlement of foundations with cracking

Soil hardening at the base of foundations

Cracks in load-bearing walls both inside and outside the house

The load-bearing structures have been reinforced and raised to a predetermined level

Instability of floor slabs and local subsidence

Stabilization of base soils and leveling of floor slabs

Deformations in the masonry at the outer wall section

Strengthening the soil at the base of the foundation with its rise

Floor subsidence occurred inside the warehouse

Restoration of the design levels of the floor and shelving in the premises

Deformations and settlements of asphalt concrete pavement

Reinforcement of foundation soils to a depth of - 5.5m

Uneven settling of the floor slab

Stabilization and lifting of reinforced concrete floor slabs

Cracks in load-bearing walls and foundations

The base and foundations have been improved and strengthened

Deformation of reinforced concrete floor slabs under new equipment

Restoration of the bearing capacity of reinforced concrete floor slabs in places of deformation

Deformations in supporting structures

Soil stabilization of foundations

Uneven subsidence of the floor and the formation of voids under it

Restoration of the design level of the floor

The surface of the concrete highway began to crack and collapse

Filling of voids under slabs, restoration of bituminous insulation

Sagging corner and crack in the outer cladding

Consolidation and strengthening of soil at the base of foundations

Building faсade subsidence

Strengthening foundations and stopping subsidence of a part of the building

Deformations of the coating of some areas of the courts

Filling voids and leveling floor structures

Wall cracks and foundation subsidence

The base of the foundation is reinforced up to 10 times

Uneven draft and roll of buildings

Buildings have been re-aligned within tolerance

Subsoil does not have sufficient bearing capacity

Compaction and stabilization of foundation soils

What we guarantee:
  • Almost instant results
  • Selection and determination of a suitable solution together with the client
  • Only top brands of equipment and tools
  • Possibility of phased implementation of the project according to the schedule required by the client
  • Post-project monitoring and efficiency, if necessary, improvements. 24/7 communication
  • Parallel improvement of the characteristics of hydro, thermal and vibration insulation of structures
Efficiency and effectiveness

Efficiency and effectiveness

5years

Extended minimum warranty terms

2-3
days

Fantastic productivity and speed

18sec

Quick material curing time

0,5mm

Accuracy at every stage of works

Thank you for your comment!
Close

Leave your phone number and our consultant will contact you

Choose a convenient time to call

Leave your email and we will send you this article

  • Services
  • Uretek methods
  • Projects
  • Video
  • About us
  • Contacts
  • Moscow
    +7 495 268 01 47
    St. Petersburg
    +7 812 627 15 05
    Rostov on Don
    +7 863 308 17 98
    Kazan
    +7 843 206 03 64
    Nizhny Novgorod
    +7 831 429 17 68
    Sevastopol
    +7 869 222 31 91
    Novosibirsk
    +7 383 280 42 61
    Uretek